, Model values CT = 10 nF, R = 1 ?, L = 3.2 ?H 50, 19002133.

?. and L. =. , Model values CT = 100 nF

, Experimental data **From model value References

D. Pham, S. Dimov, S. Bigot, A. Ivanov, and K. Popov, Micro-EDM???recent developments and research issues, Journal of Materials Processing Technology, vol.149, issue.1-3, pp.50-57, 2004.
DOI : 10.1016/j.jmatprotec.2004.02.008

E. Uhlmann, S. Piltz, and U. Doll, Machining of micro/miniature dies and moulds by electrical discharge machining, J. Mat. Proc. Tech, pp.167-488, 2005.

Y. Layouni, G. Girardin, A. Benilov, V. Semet, P. Morin et al., Onboard Electrochemical Fabrication of Microelectrodes for Micro EDM Milling Micro and Nanosystems, pp.3-215, 2011.

G. Girardin, Y. Layouni, P. Morin, and M. Cabrera, Micro EDM with the in situ electrochemical fabrication and regeneration of the tungsten microelectrode tool, International Journal of Material Forming, vol.3, issue.S1, pp.1083-1086, 2010.
DOI : 10.1007/s12289-010-0959-x

URL : https://hal.archives-ouvertes.fr/hal-01306833

K. Egashira, Y. Morita, and Y. Hattori, Electrical discharge machining of submicron holes using ultrasmall-diameter electrodes, Precision Engineering, vol.34, issue.1, pp.1-139, 2010.
DOI : 10.1016/j.precisioneng.2009.05.007

, References

D. T. Pham, Micro-EDM???recent developments and research issues, Journal of Materials Processing Technology, vol.149, issue.1-3, pp.50-57, 2004.
DOI : 10.1016/j.jmatprotec.2004.02.008

K. Egashira, Electrical discharge machining of submicron holes using ultrasmall-diameter electrodes, Precision Engineering, vol.34, issue.1, pp.139-144, 2010.
DOI : 10.1016/j.precisioneng.2009.05.007

K. Egashira, Electrical discharge machining with ultralow discharge energy, Precision Engineering, vol.30, issue.4, pp.414-420, 2010.
DOI : 10.1016/j.precisioneng.2006.01.004

Y. Layouni and Y. , Onboard Electrochemical Fabrication of Microelectrodes for Micro EDM Milling, Micro and Nanosystems, pp.215-221, 2011.
DOI : 10.2174/1876402911103030215

G. Girardin, Micro EDM with the in situ electrochemical fabrication and regeneration of the tungsten microelectrode tool, International Journal of Material Forming, vol.3, issue.S1, pp.1083-1086, 2010.
DOI : 10.1007/s12289-010-0959-x

URL : https://hal.archives-ouvertes.fr/hal-01306833

G. Girardin, Développement d'un procédé d'usinage par micro-électroérosion

Y. Xia, Soft Lithography, Angewandte Chemie International Edition, vol.37, issue.5, pp.550-575, 1998.
DOI : 10.1002/(SICI)1521-3773(19980316)37:5<550::AID-ANIE550>3.0.CO;2-G

, BIBLIOGRAPHIE

G. Cusanelli, M. Minello, and F. Torchia, Properties of Micro-Holes for Nozzle by Micro-EDM, 15th International Symposium on ElectroMachining (ISEM XV), Proceeding, 2007.

O. De-la-iglesia, V. Sebastián, R. Mallada, G. Nikolaidis, J. Coronas et al., Preparation of Pt/ZSM-5 films on stainless steel microreactors, Preparation of Pt/ZSM-5 films on stainless steel microreactors, pp.2-10, 2007.
DOI : 10.1016/j.cattod.2007.03.015

L. G. Fréchette, S. A. Jacobson, K. S. Breuer, F. F. Ehrich, R. Ghodssi et al., Demonstration of a microfabricated high-speed turbine supported on gas bearings, Solid-State Sens. Actuator Work, 2000.

J. Peirs, D. Reynaerts, and F. Verplaetsen, A microturbine for electric power generation, Sensors and Actuators A: Physical, vol.113, issue.1, pp.86-93, 2004.
DOI : 10.1016/j.sna.2004.01.003

C. K. Malek, J. Jeannot, and ". M. Froelicher, Multi-material micro/nanomanufacturing at FEMTO-innovation, International Journal of Technology Transfer and Commercialisation, vol.7, issue.2/3, pp.2-3, 2008.
DOI : 10.1504/IJTTC.2008.020359

T. Velten, H. H. Ruf, D. Barrow, N. Aspragathos, P. Lazarou et al., Packaging of Bio-MEMS : Strategies , Technologies , and Applications, pp.533-546, 2005.

R. A. Receveur, F. W. Lindemans, and N. F. De-rooij, Microsystem technologies for implantable applications, Journal of Micromechanics and Microengineering, vol.17, issue.5, pp.50-80, 2007.
DOI : 10.1088/0960-1317/17/5/R02

K. Cheval, J. Coulm, S. Gout, Y. Layouni, P. Lombard et al., Progress in the Manufacturing of Molded Interconnected Devices by 3D Microcontact Printing, Advanced Materials Research, vol.1038, pp.57-60, 2014.
DOI : 10.4028/www.scientific.net/AMR.1038.57

I. Ait-ali, P. Morin, V. Semet, M. Cabrera, and R. Ferrigno, High Precision Machining Strategy for the Integration of Electrochemical Cells in Cyclic Olefin Copolymer Microfluidic Devices, Procedia Engineering, vol.47, pp.450-453, 2012.
DOI : 10.1016/j.proeng.2012.09.181

K. P. Rajurkar, G. Levy, A. Malshe, M. M. Sundaram, J. Mcgeough et al., Micro and Nano Machining by Electro-Physical and Chemical Processes, Micro and Nano Machining by Electro-Physical and Chemical Processes, pp.643-666, 2006.
DOI : 10.1016/j.cirp.2006.10.002

M. P. Jahan, M. Rahman, and Y. S. Wong, A review on the conventional and micro-electrodischarge machining of tungsten carbide, International Journal of Machine Tools and Manufacture, vol.51, issue.12, pp.837-858, 2011.
DOI : 10.1016/j.ijmachtools.2011.08.016

T. Gietzelt and L. Eichhorn, Mechanical Micromachining by Drilling, Milling and Slotting, DOI: 10.5772/34124 in " Micromachining Techniques for Fabrication of Micro and Nano Structures

G. Guillaume, Développement d'un procédé d'usinage par micro-électroérosion Thèse de l'Ecole Doctorale EEA (Electronique, Electrotechnique et Automatique) de l, pp.315-2012

M. Cabrera, P. Morin, G. Girardin, Y. Layouni, and V. Semet, Procédé et dispositif de fabrication d'un cylindre de diamètre micrométrique, -brevet européen EP2555897 délivré le 13, pp.2013-1001407, 2011.

M. Cabrera, Machine et procédé d'usinage d'une pièce par micro-electroérosion Machine and method for machining a part by micro-electrical discharge machining. brevet d'invention français FR0805148 délivré le 09, 2011.

Y. Layouni, G. Girardin, A. Benilov, V. Semet, P. Morin et al., Micro EDM Milling with Automated Electrochemical Fabrication of the Cylindrical Microtool, Micro Nanosyst, vol.3, issue.1, pp.1-7, 2011.
URL : https://hal.archives-ouvertes.fr/hal-01306813

A. Benilov, Nouveaux procédés d'élaboration et de mise en oeuvre de capteurs et microsystèmes en silicium et silicium poreux par des méthodes luminescentes et électriques, thèse de l'Ecole Centrale de Lyon, 2007.

K. Ojha, R. K. Garg, and K. K. Singh, MRR Improvement in Sinking Electrical Discharge Machining: A Review, Journal of Minerals and Materials Characterization and Engineering, vol.09, issue.08, pp.709-739, 2010.
DOI : 10.4236/jmmce.2010.98051

URL : https://doi.org/10.4236/jmmce.2010.98051

A. Anders, Tracking down the origin of arc plasma science I. early pulsed and oscillating discharges, IEEE Transactions on Plasma Science, vol.31, issue.5, pp.1052-1059, 2003.
DOI : 10.1109/TPS.2003.815476

URL : https://digital.library.unt.edu/ark:/67531/metadc785757/m2/1/high_res_d/823202.pdf

A. Descoeudres, characterization of electrical discharge machining plasmas. Thèse N° 3542 de l'Ecole Polytechnique Fédérale de Lausanne pour l'obtention du grade de docteur ès sciences, 2006.

S. Singh, S. Maheshwari, and P. C. Pandey, Some investigations into the electric discharge machining of hardened tool steel using different electrode materials, Journal of Materials Processing Technology, vol.149, issue.1-3, pp.1-3, 2004.
DOI : 10.1016/j.jmatprotec.2003.11.046

A. Pandey and S. Singh, Current research trends in variants of Electrical Discharge Machining : A review, Int. J. Eng. Sci. Technol, vol.2, issue.6, pp.2172-2191, 2010.

C. B. Reddy, G. J. Reddy, and C. E. Reddy, Growth of Electrical Discharge Machining and Its Applications ? A Review, Int. J. Eng. Res. Dev, vol.4, issue.12, pp.13-22, 2012.

D. Sudhakara, B. V. Naik, and B. Sreenivasulu, The experimental analysis of surface characteristics of inconel-718 using electrical discharge machining, Int. J. Mech. Eng. Robot. Res, vol.1, issue.3, pp.371-388, 2012.

B. M. Schumacher, R. Krampitz, and J. Kruth, Historical Phases of EDM Development Driven by the Dual Influence of ???Market Pull??? and ???Science Push???, Procedia CIRP, vol.6, pp.5-12, 2013.
DOI : 10.1016/j.procir.2013.03.001

L. Bianchi and E. , Usinage par électroérosion, pp.2-24, 1987.

C. Joseph, Contribution à l'accroissement des performances du processus de ?EDM par l'utilisation d'un robot à dynamique élevée et de haute précision, 2005.

A. Descoeudres, C. Hollenstein, G. Wälder, and R. Perez, Time-resolved imaging and spatially-resolved spectroscopy of electrical discharge machining plasma, Journal of Physics D: Applied Physics, vol.38, issue.22
DOI : 10.1088/0022-3727/38/22/009

URL : https://infoscience.epfl.ch/record/120244/files/lrp_808_05.pdf

. Appl and . Phys, , pp.4066-4073, 2005.

A. Descoeudres, C. Hollenstein, R. Demellayer, and G. Wälder, Optical emission spectroscopy of electrical discharge machining plasma, J. Mater. Process. Technol, vol.149, pp.1-3, 2004.
DOI : 10.1088/0022-3727/37/6/012

URL : https://infoscience.epfl.ch/record/121327/files/lrp_784_04_hq.pdf

W. Natsu, S. Ojima, T. Kobayashi, and M. Kunieda, Temperature Distribution Measurement in EDM Arc Plasma Using Spectroscopy, JSME International Journal Series C, vol.47, issue.1, pp.384-390, 2004.
DOI : 10.1299/jsmec.47.384

A. Kojima, W. Natsu, and M. Kunieda, Spectroscopic measurement of arc plasma diameter in EDM, CIRP Annals, vol.57, issue.1, pp.203-207, 2008.
DOI : 10.1016/j.cirp.2008.03.097

K. Albinski, K. Musiol, A. Miernikiewicz, S. Labuz, and M. Malota, The temperature of a plasma used in electrical discharge machining, Plasma Sources Science and Technology, vol.5, issue.4, pp.736-742, 1996.
DOI : 10.1088/0963-0252/5/4/015

B. M. Schumacher, After 60 years of EDM the discharge process remains still disputed, Journal of Materials Processing Technology, vol.149, issue.1-3, pp.376-381, 2004.
DOI : 10.1016/j.jmatprotec.2003.11.060

C. Joseph, Contribution à l'accroissement des performances du processus de ?EDM par l'utilisation d'un robot, Thèse n°3281, EPFL, 142 p, 2005.

A. Beroual, M. Zahn, A. Badent, A. J. Schwabe, and H. Yamashita, Propagation and Structure of Streamers in liquid Diele, pp.6-17, 1998.
DOI : 10.1109/57.662781

T. Aka-ngnui and A. Beroual, Bubble dynamics and transition into streamers in liquid dielectrics under a high divergent electric field, Journal of Physics D: Applied Physics, vol.34, issue.9, pp.1408-1412, 2001.
DOI : 10.1088/0022-3727/34/9/318

URL : https://hal.archives-ouvertes.fr/hal-00141501

J. Qian, R. P. Joshi, E. Schamiloglu, J. Gaudet, J. R. Woodworth et al., Analysis of polarity effects in the electrical breakdown of liquids, Journal of Physics D: Applied Physics, vol.39, issue.2, pp.359-369, 2006.
DOI : 10.1088/0022-3727/39/2/018

J. Qian, R. P. Joshi, J. Kolb, K. H. Schoenbach, J. Dickens et al., Microbubble-based model analysis of liquid breakdown initiation by a submicrosecond pulse, Journal of Applied Physics, vol.59, issue.11, p.113304, 2005.
DOI : 10.1021/ac00146a003

Y. S. Wong, L. C. Lim, I. Rahuman, and W. M. Tee, Near-mirror-finish phenomenon in EDM using powder-mixed dielectric, Journal of Materials Processing Technology, vol.79, issue.1-3, pp.1-3, 1998.
DOI : 10.1016/S0924-0136(97)00450-0

W. Natsu, M. Shimoyamada, and M. Kunieda, Study on Expansion Process of EDM Arc Plasma, JSME International Journal Series C, vol.49, issue.2, pp.600-605, 2006.
DOI : 10.1299/jsmec.49.600

G. Vasudevamurthy and T. W. Knight, Effect of system parameters on size distribution of 304 stainless steel particles produced by electrical discharge mechanism, Materials Letters, vol.61, issue.27, pp.4872-4874, 2007.
DOI : 10.1016/j.matlet.2007.03.070

J. Diot, W. Zaugg, G. Naville, and J. Briffod, Rotative tool-electrodes of simple shapes for 3D electroerosive machining, 2001.

K. H. Ho and S. T. Newman, State of the art electrical discharge machining (EDM), International Journal of Machine Tools and Manufacture, vol.43, issue.13, pp.1287-1300, 2003.
DOI : 10.1016/S0890-6955(03)00162-7

D. T. Pham, S. S. Dimov, S. Bigot, A. Ivanov, and K. Popov, Micro-EDM???recent developments and research issues, Journal of Materials Processing Technology, vol.149, issue.1-3, pp.1-3, 2004.
DOI : 10.1016/j.jmatprotec.2004.02.008

R. K. Garg, K. K. Singh, A. Sachdeva, V. S. Sharma, K. Ojha et al., Review of research work in sinking EDM and WEDM on metal matrix composite materials, The International Journal of Advanced Manufacturing Technology, vol.24, issue.4, pp.5-8, 2010.
DOI : 10.1111/j.1551-2916.1988.tb00227.x

M. Kunieda, B. Lauwers, K. P. Rajurkar, and B. M. Schumacher, Advancing EDM through Fundamental Insight into the Process, CIRP Annals, vol.54, issue.2, pp.64-87, 2005.
DOI : 10.1016/S0007-8506(07)60020-1

M. P. Jahan, M. Rahman, and Y. S. Wong, A review on the conventional and micro-electrodischarge machining of tungsten carbide, International Journal of Machine Tools and Manufacture, vol.51, issue.12, pp.837-858, 2011.
DOI : 10.1016/j.ijmachtools.2011.08.016

S. Sommer, C. Sommer, E. Complete, E. Handbook-wire, and R. Edm, Small Hole EDM, Practical Information for Designers, Engineers, Machinists, Tool and Die Makers, Mold Makers and Others in the Machining Fields, 2005.

M. Munz, M. Risto, and R. Haas, Specifics of Flushing in Electrical Discharge Drilling, Procedia CIRP, vol.6, pp.83-88, 2013.
DOI : 10.1016/j.procir.2013.03.024

URL : https://doi.org/10.1016/j.procir.2013.03.024

P. Kuppan, S. Rajadurai, and . Narayanan, Influence of EDM process parameters in deep hole drilling of Inconel 718, The International Journal of Advanced Manufacturing Technology, vol.12, issue.4, pp.74-84, 2007.
DOI : 10.1007/s00170-007-1084-y

M. Sen and H. Shan, A review of electrochemical macro- to micro-hole drilling processes, International Journal of Machine Tools and Manufacture, vol.45, issue.2, pp.137-152, 2005.
DOI : 10.1016/j.ijmachtools.2004.08.005

J. Richard and R. Demellayer, Micro-EDM-milling Development of New Machining Technology for Micro-machining, Procedia CIRP, vol.6, pp.292-296, 2013.
DOI : 10.1016/j.procir.2013.03.023

URL : https://doi.org/10.1016/j.procir.2013.03.023

K. Liu, B. Lauwers, and D. Reynaerts, Process capabilities of Micro-EDM and its applications, The International Journal of Advanced Manufacturing Technology, vol.221, issue.1, pp.1-4, 2010.
DOI : 10.1243/0954406JMES472

URL : http://www.4m-net.org/files/papers/4M2007/367110/PID367110.pdf

F. Han, Improvement of machining characteristics of micro-EDM using transistor type isopulse generator and servo feed control, Precision Engineering, vol.28, issue.4, pp.378-385, 2004.
DOI : 10.1016/j.precisioneng.2003.11.005

S. Mahendran, R. Devarajan, T. Nagarajan, and A. Majdi, A Review of Micro-EDM. Proceedings of the International MultiConference of Engineering and Computer Scientists, vol.2, 2010.

A. Shah, V. Prajapati, P. Patel, and A. Pandey, Development of pulsed power dc supply for micro edm, UGC Natl. Conf. Adv. Comput. Integr. Manuf

G. Bissacco, H. N. Hansen, G. Tristo, and J. Valentincic, Feasibility of wear compensation in micro EDM milling based on discharge counting and discharge population characterization, CIRP Annals, vol.60, issue.1, pp.231-234, 2011.
DOI : 10.1016/j.cirp.2011.03.064

D. K. Chung, B. H. Kim, and C. N. Chu, Micro electrical discharge milling using deionized water as a dielectric fluid, Journal of Micromechanics and Microengineering, vol.17, issue.5, pp.867-874, 2007.
DOI : 10.1088/0960-1317/17/5/004

G. Paul, S. Roy, S. Sarkar, N. Hanumaiah, and S. Mitra, Investigations on influence of process variables on crater dimensions in micro-EDM of ??-titanium aluminide alloy in dry and oil dielectric media, The International Journal of Advanced Manufacturing Technology, vol.6, issue.11, pp.5-8, 2012.
DOI : 10.1007/BF02920065

Y. Wong, M. Rahman, H. Lim, H. Han, and N. Ravi, Investigation of micro-EDM material removal characteristics using single RC-pulse discharges, Journal of Materials Processing Technology, vol.140, issue.1-3, pp.1-3, 2003.
DOI : 10.1016/S0924-0136(03)00771-4

M. Kunieda, Challenges to miniaturization in micro EDM, ASPE Proc. Annu. Meet, vol.23, 2008.

H. V. Sinh, B. T. Long, and N. C. Hien, A study of method to control EDMing process, Hanoi Univ. Technol. Ritsumeikan Univ. Jt. Symp. Sensory-Motor Coord. Robot. Manip, pp.91-96, 2004.

F. Han, Y. Yamada, T. Kawakami, and M. Kunieda, Experimental attempts of sub-micrometer order size machining using micro-EDM, Precision Engineering, vol.30, issue.2, pp.123-131, 2006.
DOI : 10.1016/j.precisioneng.2005.06.005

A. Benilov, V. Skryshevsky, Y. Robach, and M. Cabrera, Micro and nano electrical discharge machining in microfluidics and micro nanotechnology, International Journal of Material Forming, vol.1, issue.S1, pp.1315-1318, 2008.
DOI : 10.1007/s12289-008-0145-6

A. B. Asad, Micro-EDM process for tool-base compound micromachining, 2012.

E. Uhlmann, S. Piltz, and U. Doll, Machining of micro/miniature dies and moulds by electrical discharge machining???Recent development, Journal of Materials Processing Technology, vol.167, issue.2-3, pp.3-488, 2005.
DOI : 10.1016/j.jmatprotec.2005.06.013

, 4M | Multi Material Micro Manufacture Network of Excellence

M. P. Jahan, Y. S. Wong, and M. Rahman, A study on the fine-finish die-sinking micro-EDM of tungsten carbide using different electrode materials, Journal of Materials Processing Technology, vol.209, issue.8, pp.3956-3967, 2009.
DOI : 10.1016/j.jmatprotec.2008.09.015

O. Blatnik, J. Valentin, and M. Junkar, Comparison of optimal machining parameters of sinking EDM and micro EDM processes, Int. Conf. Multi-material micro Manuf. Karslruhe, Ger, pp.473-476, 2005.

G. L. Benavides, L. F. Bieg, M. P. Saavedra, and E. Bryce, High aspect ratio meso-scale parts enabled by wire micro-EDM, Microsystem Technologies, vol.8, issue.6, pp.395-401, 2002.
DOI : 10.1007/s00542-002-0190-x

A. Schoth, R. Förster, and W. Menz, Micro wire EDM for high aspect ratio 3D microstructuring of ceramics and metals, Microsystem Technologies, vol.11, issue.4-5, pp.4-5, 2005.
DOI : 10.1007/s00542-004-0399-y

M. Yan, C. Huang, C. Fang, and C. Chang, Development of a prototype Micro-Wire-EDM machine, Journal of Materials Processing Technology, vol.149, issue.1-3, pp.1-3, 2004.
DOI : 10.1016/j.jmatprotec.2003.10.057

D. Pham, S. Dimov, S. Bigot, A. Ivanov, and K. Popov, Micro EDM Drilling: Accuracy Study, Adv. Integr. Des. Manuf. Mech. Eng, pp.281-294, 2005.
DOI : 10.1007/1-4020-3482-2_22

C. Diver, J. Atkinson, H. J. Helml, and L. Li, Micro-EDM drilling of tapered holes for industrial applications, J. Mater. Process. Technol, vol.149, pp.1-3, 2004.

T. Masuzawa, M. Fujino, K. Kobayashi, T. Suzuki, and N. Kinoshita, Wire Electro-Discharge Grinding for Micro-Machining, CIRP Annals, vol.34, issue.1, pp.431-434, 1985.
DOI : 10.1016/S0007-8506(07)61805-8

D. K. Chung, B. H. Kim, and C. N. Chu, Micro electrical discharge milling using deionized water as a dielectric fluid, Journal of Micromechanics and Microengineering, vol.17, issue.5, pp.867-874, 2007.
DOI : 10.1088/0960-1317/17/5/004

K. Y. Song, D. K. Chung, M. S. Park, and C. N. Chu, Micro electrical discharge milling of WC-Co using a deionized water spray and a bipolar pulse, Journal of Micromechanics and Microengineering, vol.20, issue.4, pp.1-10, 2010.
DOI : 10.1088/0960-1317/20/4/045022

H. Yu, J. Luan, J. Li, Y. Zhang, Z. Yu et al., A new electrode wear compensation method for improving performance in 3D micro EDM milling, Journal of Micromechanics and Microengineering, vol.20, issue.5, p.7, 2010.
DOI : 10.1088/0960-1317/20/5/055011

K. Takahata, N. Shibaike, and H. Guckel, High-aspect-ratio WC-Co microstructure produced by the combination of LIGA and micro-EDM, Microsystem Technologies, vol.6, issue.5, pp.175-178, 2000.
DOI : 10.1007/s005420000052

M. T. Richardson and Y. B. Gianchandani, Achieving precision in high density batch mode micro-electro-discharge machining, Journal of Micromechanics and Microengineering, vol.18, issue.1, p.12, 2008.
DOI : 10.1088/0960-1317/18/1/015002

I. Ait-ali, Développement et intégration de microcapteurs de pH et de température dans des dispositifs microfluidiques polymères, Thèse de doctorat soutenue publiquement le 13-01-2014 à l'institut des nanotechnologies de Lyon INL, 2014.

S. Chen, H. Yang, and C. Du, Study of an ultrafine w-EDM technique, Journal of Micromechanics and Microengineering, vol.19, issue.11, p.8, 2009.
DOI : 10.1088/0960-1317/19/11/115033

T. Masuzawa, J. Tsukamoto, and M. Fujino, Drilling of Deep Microholes by EDM, CIRP Annals, vol.38, issue.1, pp.195-198, 1989.
DOI : 10.1016/S0007-8506(07)62683-3

M. L. Jeswani, Small hole drilling in EDM, International Journal of Machine Tool Design and Research, vol.19, issue.3, pp.165-169, 1979.
DOI : 10.1016/0020-7357(79)90006-4

B. Jha and M. Rao, An overview of technology and research in electrode design and manufacturing in sinking electrical discharge machining, J. Eng. Tehcnology Rev, vol.4, issue.2, pp.118-130, 2011.

M. Ay, U. Çayda?, and A. Hasçal?k, Optimization of micro-EDM drilling of inconel 718 superalloy, The International Journal of Advanced Manufacturing Technology, vol.46, issue.3, pp.5-8, 2012.
DOI : 10.1016/j.ijmachtools.2005.03.017

Z. Wansheng, W. Zhenlong, D. Shichun, C. Guanxin, and W. Hongyu, Ultrasonic and electric discharge machining to deep and small hole on titanium alloy, Journal of Materials Processing Technology, vol.120, issue.1-3, pp.1-3, 2002.
DOI : 10.1016/S0924-0136(01)01149-9

J. Fleischer, T. Masuzawa, J. Schmidt, and M. Knoll, New applications for micro-EDM, Journal of Materials Processing Technology, vol.149, issue.1-3, pp.1-3, 2004.
DOI : 10.1016/j.jmatprotec.2004.02.012

T. Masuzawa, Proceedings of the 13th International Symposium for Electromachining (ISEM. 13), pp.3-20, 2001.

S. P. Moylan, S. Chandrasekar, and G. L. Benavides, High-Speed Micro-Electro- Discharge Machining, Sandia Report SAND2005-5023 (Oak Ridge, 2005.

I. M. Bragança, G. R. Ribeiro, L. M. Alves, P. A. Rosa, . Machine et al., , 2011.

M. Garzon, O. Adams, D. Veselovac, M. Blattner, R. Thiel et al., High Speed Micro Machining Processes Analysis for the Precision Manufacturing, Procedia CIRP, vol.1, pp.609-614, 2012.
DOI : 10.1016/j.procir.2012.05.008

URL : https://doi.org/10.1016/j.procir.2012.05.008

T. Masaki, T. Mizutani, A. Tanaka, and K. Yonemaochi, U.S. Patent No, vol.4900890, 1990.

C. J. Morgan, Micro electro-discharge machining: techniques and procedures for micro fabrication, 2004.

C. J. Morgan, R. R. Vallance, and E. R. Marsh, Micro-machining and micro-grinding with tools fabricated by micro electro-discharge machining, International Journal of Nanomanufacturing, vol.1, issue.2, pp.242-258, 2006.
DOI : 10.1504/IJNM.2006.012196

C. Morgan, S. Shreve, and R. R. Vallance, Precision of micro shafts machined with wire electro-discharge grinding, Proceedings of the Winter Topical Meeting on Machines and Processes for Micro-Scale and Meso-Scale Fabrication, Metrology, and Assembly, 2003.

M. M. Anwar, A study on micro-patterning of polypyrrole using micro-electrodischarge machining. A PHD thésis submitted in partial fulfillment of the requirement for the degree of, 2012.

T. T. Öpöz, Manufacturing of micro holes by using micro electric discharge machining (Micro-EDM), 2008.

F. Leleu, Micro-fraisage 3D assisté par électro-érosion, Journée « De la microplasturgie à la nano-plasturgie

. Décembre, , 2011.

K. Liu, E. Ferraris, J. Peirs, B. Lauwers, and D. Reynaerts, Process capabilities of Micro-EDM and its applications, The International Journal of Advanced Manufacturing Technology, vol.221, issue.1, pp.11-19, 2009.
DOI : 10.1243/0954406JMES472

K. Liu, D. Reynaerts, and B. Lauwers, Influence of the pulse shape on the EDM performance of Si 3 N 4 ???TiN ceramic composite, CIRP Annals, vol.58, issue.1, pp.217-220, 2009.
DOI : 10.1016/j.cirp.2009.03.002

R. Jurischka, A. Schoth, C. Müller, C. Baggi, R. Gallera et al., Rapid Hybrid Tooling based on CNC-and ?EDM-milling to fabricate Lab-on-a-Chip Systems, Proc. 3rd Int. Conf. Multi-Material Micro, pp.3-5, 2007.

M. D. Nguyen, M. Rahman, and Y. S. Wong, Enhanced surface integrity and dimensional accuracy by simultaneous micro-ED/EC milling, CIRP Annals, vol.61, issue.1, pp.191-194, 2012.
DOI : 10.1016/j.cirp.2012.03.011

G. Girardin, Y. Layouni, P. Morin, and M. Cabrera, Micro EDM with the in situ electrochemical fabrication and regeneration of the tungsten microelectrode tool, International Journal of Material Forming, vol.3, issue.S1, pp.1083-1086, 2010.
DOI : 10.1007/s12289-010-0959-x

URL : https://hal.archives-ouvertes.fr/hal-01306833

D. Dornfeld, S. Min, and Y. Takeuchi, Recent Advances in Mechanical Micromachining, CIRP Annals, vol.55, issue.2, pp.745-768, 2006.
DOI : 10.1016/j.cirp.2006.10.006

Y. Layouni, G. Girardin, A. Benilov, V. Semet, P. Morin et al., Onboard Electrochemical Fabrication of Microelectrodes for Micro EDM Milling, Micro and Nanosystemse, vol.3, issue.3, pp.215-221, 2011.
DOI : 10.2174/1876402911103030215

M. Cabrera, Y. Layouni, G. Girardin, R. Dahmani, and V. Semet, Characterization and Modeling of Electrical Discharges in Air for Micro EDM Machining, Proceedings of the 10th International Conference on Multi-Material Micro Manufacture, pp.8-10, 2013.
DOI : 10.3850/978-981-07-7247-5-357

J. Chae, S. S. Park, and T. Freiheit, Investigation of micro-cutting operations, International Journal of Machine Tools and Manufacture, vol.46, issue.3-4, pp.3-4, 2006.
DOI : 10.1016/j.ijmachtools.2005.05.015

X. Ding, D. L. Butler, G. C. Lim, C. K. Cheng, K. C. Shaw et al., Machining with micro-size single crystalline diamond tools fabricated by a focused ion beam, Journal of Micromechanics and Microengineering, vol.19, issue.2, p.25005, 2009.
DOI : 10.1088/0960-1317/19/2/025005

P. Li, D. Zdebski, H. H. Langen, M. Hoogstrate, J. et al., Micromilling of thin ribs with high aspect ratios, Journal of Micromechanics and Microengineering, vol.20, issue.11, p.115013, 2010.
DOI : 10.1088/0960-1317/20/11/115013

G. Barillaro, M. Nannini, and . Piotto, Electrochemical etching in HF solution for silicon micromachining, Sensors and Actuators A: Physical, vol.102, issue.1-2, pp.195-201, 2002.
DOI : 10.1016/S0924-4247(02)00385-0

L. Cagnon, V. Kirchner, M. Kock, R. Schuster, G. Ertl et al., Electrochemical Micromachining of Stainless Steel by Ultrashort Voltage Pulses, Electrochemical Micromachining of Stainless Steel by Ultrashort Voltage Pulses, pp.299-314, 2003.
DOI : 10.1002/maco.19840351002

URL : https://hal.archives-ouvertes.fr/hal-01002635

H. Hocheng, Y. H. Sun, S. C. Lin, and P. S. Kao, A material removal analysis of electrochemical machining using flat-end cathode, Journal of Materials Processing Technology, vol.140, issue.1-3, pp.1-3, 2003.
DOI : 10.1016/S0924-0136(03)00791-X

B. H. Kim, C. W. Na, Y. S. Lee, D. K. Choi, and C. N. Chu, Micro Electrochemical Machining of 3D Micro Structure Using Dilute Sulfuric Acid, CIRP Annals, vol.54, issue.1, pp.191-194, 2005.
DOI : 10.1016/S0007-8506(07)60081-X

J. Kozak, K. P. Rajurkar, and Y. Makkar, Study of Pulse Electrochemical Micromachining, Journal of Manufacturing Processes, vol.6, issue.1, pp.7-14, 2001.
DOI : 10.1016/S1526-6125(04)70055-9

B. J. Park, B. H. Kim, and C. N. Chu, The Effects of Tool Electrode Size on Characteristics of Micro Electrochemical Machining, CIRP Annals, vol.55, issue.1, pp.197-200, 2006.
DOI : 10.1016/S0007-8506(07)60397-7

H. S. Shin, B. H. Kim, and C. N. Chu, Analysis of the side gap resulting from micro electrochemical machining with a tungsten wire and ultrashort voltage pulses, Journal of Micromechanics and Microengineering, vol.18, issue.7, p.75009, 2008.
DOI : 10.1088/0960-1317/18/7/075009

Y. Wang, H. Chen, Z. Wang, Z. Zhou, and D. Shan, Development of a Soft-Computer Numerical Control System for Micro-Electrochemical Machining, American Journal of Nanotechnology, vol.1, issue.2, pp.51-55, 2010.
DOI : 10.3844/ajnsp.2010.51.55

URL : http://thescipub.com/pdf/10.3844/ajnsp.2010.51.55

R. Wuthrich and V. Fascio, Machining of non-conducting materials using electrochemical discharge phenomenon???an overview, International Journal of Machine Tools and Manufacture, vol.45, issue.9, pp.1095-1108, 2005.
DOI : 10.1016/j.ijmachtools.2004.11.011

R. Wüthrich and A. Allagui, Building micro and nanosystems with electrochemical discharges, Electrochimica Acta, vol.55, issue.27, pp.8189-8196, 2010.
DOI : 10.1016/j.electacta.2010.01.096

D. Zhu, K. Wang, and N. S. Qu, Micro Wire Electrochemical Cutting by Using In Situ Fabricated Wire Electrode, CIRP Annals, vol.56, issue.1, pp.241-244, 2007.
DOI : 10.1016/j.cirp.2007.05.057

H. Klank, J. P. Kutter, and O. Geschke, CO2-laser micromachining and back-end processing for rapid production of PMMA-based microfluidic systems, Lab on a Chip, vol.2, issue.4, pp.242-246, 2002.
DOI : 10.1039/b206409j

URL : http://orbit.dtu.dk/en/publications/co2laser-micromachining-and-backend-processing-for-rapid-production-of-pmmabased-microfluidic-systems(2d9bf082-7724-4699-a229-647d81133901).html

J. Cheng, C. Wei, K. Hsu, and T. Young, Direct-write laser micromachining and universal surface modification of PMMA for device development, Sensors and Actuators B: Chemical, vol.99, issue.1, pp.186-196, 2004.
DOI : 10.1016/j.snb.2003.10.022

H. Y. Zheng and Z. W. Jiang, Femtosecond laser micromachining of silicon with an external electric field, Journal of Micromechanics and Microengineering, vol.20, issue.1, p.17001, 2010.
DOI : 10.1088/0960-1317/20/1/017001

K. Liu, Z. Nickolov, J. Oh, and H. , KrF excimer laser micromachining of MEMS materials: characterization and applications, Journal of Micromechanics and Microengineering, vol.22, issue.1, p.15012, 2012.
DOI : 10.1088/0960-1317/22/1/015012

W. Longsine-parker and A. Han, laser micromachining method, Journal of Micromechanics and Microengineering, vol.22, issue.1, p.15006, 2012.
DOI : 10.1088/0960-1317/22/1/015006

M. Farsari, G. Filippidis, S. Zoppel, G. Reider, and C. Fotakis, Efficient femtosecond laser micromachining of bulk 3C-SiC, Journal of Micromechanics and Microengineering, vol.15, issue.9, pp.1786-1789, 2005.
DOI : 10.1088/0960-1317/15/9/022

S. Kim, B. H. Kim, D. K. Chung, H. S. Shin, and C. N. Chu, Hybrid micromachining using a nanosecond pulsed laser and micro EDM, Journal of Micromechanics and Microengineering, vol.20, issue.1, p.15037, 2010.
DOI : 10.1088/0960-1317/20/1/015037

G. , D. Valle, R. Osellame, and P. Laporta, Micromachining of photonic devices by femtosecond laser pulses, J. Opt. A Pure Appl. Opt, vol.11, issue.1, p.13001, 2009.
DOI : 10.1088/1464-4258/11/4/049801

T. Endo, T. Tsujimoto, and K. Mitsui, Study of vibration-assisted micro-EDM???The effect of vibration on machining time and stability of discharge, Precision Engineering, vol.32, issue.4, pp.269-277, 2008.
DOI : 10.1016/j.precisioneng.2007.09.003

P. J. Liew, J. Yan, and T. Kuriyagawa, Fabrication of deep micro-holes in reaction-bonded SiC by ultrasonic cavitation assisted micro-EDM, International Journal of Machine Tools and Manufacture, vol.76, pp.13-20, 2014.
DOI : 10.1016/j.ijmachtools.2013.09.010

T. Ichikawa and W. Natsu, Realization of Micro-EDM under Ultra-Small Discharge Energy by Applying Ultrasonic Vibration to Machining Fluid, Procedia CIRP, vol.6, pp.326-331, 2013.
DOI : 10.1016/j.procir.2013.03.094

URL : https://doi.org/10.1016/j.procir.2013.03.094

A. Gangadhart, M. S. Shunmugam, and P. K. Philip, Pulse train studies in EDM with controlled pulse relaxation, International Journal of Machine Tools and Manufacture, vol.32, issue.5, pp.651-657
DOI : 10.1016/0890-6955(92)90020-H

D. Okano, Simple method of determining plasma impedance of streamer discharge in atmospheric air, Review of Scientific Instruments, vol.115, issue.12, pp.1-5, 2011.
DOI : 10.1029/97JD03116

B. Ekmekci, Residual stresses and white layer in electric discharge machining (EDM), Applied Surface Science, vol.253, issue.23, pp.9234-9240, 2007.
DOI : 10.1016/j.apsusc.2007.05.078

K. U. Leuven and S. Integrity, Study of the White Layer of a Surface Machined by Die-Sinking Electro-Discharge Machining, pp.169-172, 1995.

H. T. Lee and T. Y. Tai, Relationship between EDM parameters and surface crack formation, Journal of Materials Processing Technology, vol.142, issue.3, pp.676-683, 2003.
DOI : 10.1016/S0924-0136(03)00688-5

C. Ferri, A. Ivanov, and A. Petrelli, Electrical measurements in ?-EDM, J. Micromechanics Microengineering, vol.18, issue.9, p.13, 2008.
DOI : 10.1088/0960-1317/18/8/085007

H. S. Lim, Y. S. Wong, M. Rahman, and M. K. Edwin-lee, A study on the machining of high-aspect ratio micro-structures using micro-EDM, Journal of Materials Processing Technology, vol.140, issue.1-3, pp.1-3, 2003.
DOI : 10.1016/S0924-0136(03)00760-X

M. Rahman, H. S. Lim, K. S. Neo, Y. S. Kumar, X. P. Wong et al., Toolbased nanofinishing and micromachining, J. Mater. Process. Technol, vol.185, pp.1-3, 2007.
DOI : 10.1016/j.jmatprotec.2006.03.121

M. Sablier, Usinage électrochimique, pp.2-14, 1996.

S. Singh and A. Bhardwaj, Review to EDM by Using Water and Powder-Mixed Dielectric Fluid, Journal of Minerals and Materials Characterization and Engineering, vol.10, issue.02, pp.199-230, 2011.
DOI : 10.4236/jmmce.2011.102014

URL : https://doi.org/10.4236/jmmce.2011.102014

A. J. Melmed, The art and science and other aspects of making sharp tips, Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures, vol.9, issue.2, p.601, 1991.
DOI : 10.1116/1.585467

M. Salerno, Coating of tips for electrochemical scanning tunneling microscopy by means of silicon, magnesium, and tungsten oxides, Review of Scientific Instruments, vol.6, issue.9, p.93703, 2010.
DOI : 10.1007/s003390051197

B. Ju, Y. Chen, and Y. Ge, The art of electrochemical etching for preparing tungsten probes with controllable tip profile and characteristic parameters, Review of Scientific Instruments, vol.82, issue.1, p.13707, 2011.
DOI : 10.1063/1.2756997

Y. Liu, D. Zhu, Y. Zeng, and H. Yu, Development of microelectrodes for electrochemical micromachining, The International Journal of Advanced Manufacturing Technology, vol.47, issue.6, pp.1-4, 2010.
DOI : 10.1007/s00170-009-2246-x

Z. Fan and L. Hourng, The analysis and investigation on the microelectrode fabrication by electrochemical machining, International Journal of Machine Tools and Manufacture, vol.49, issue.7-8, pp.7-8, 2009.
DOI : 10.1016/j.ijmachtools.2009.01.011

M. Kulawik, M. Nowicki, G. Thielsch, L. Cramer, H. Rust et al., A double lamellae dropoff etching procedure for tungsten tips attached to tuning fork atomic force microscopy/scanning tunneling microscopy sensors, Review of Scientific Instruments, vol.72, issue.2, p.1027, 2003.
DOI : 10.1063/1.1416108

A. Lucier, Preparation and Characterization of Tungsten Tips Suitable for Molecular Electronics Studies. Thesis submitted to McGill University in partial fulfillment of the requirements od the degree of Master of Science, 2004.

M. Anik, pH-dependent anodic reaction behavior of tungsten in acidic phosphate solutions, Electrochimica Acta, vol.54, issue.15, pp.3943-3951, 2009.
DOI : 10.1016/j.electacta.2009.02.014

M. Anik, Anodic reaction characteristics of tungsten in basic phosphate solutions, Corrosion Science, vol.52, issue.9, pp.3109-3117, 2010.
DOI : 10.1016/j.corsci.2010.05.037

H. Lim, Y. Lim, and S. H. Kim, Fabrication of tungsten micro-punch for micro-nozzles, Review of Scientific Instruments, vol.61, issue.8, p.3470, 2001.
DOI : 10.1016/0022-0728(88)80042-1

M. Anik and K. Osseo-asare, Effect of pH on the Anodic Behavior of Tungsten, Journal of The Electrochemical Society, vol.139, issue.88, p.224, 2002.
DOI : 10.1149/1.2069096

R. D. Armstrong, K. Edmondson, and R. E. Firman, The anodic dissolution of tungsten in alkaline solution, Journal of Electroanalytical Chemistry and Interfacial Electrochemistry, vol.40, issue.1, pp.19-28, 1972.
DOI : 10.1016/S0022-0728(72)80122-0

G. S. Kelsey, The Anodic Oxidation of Tungsten in Aqueous Base, Journal of The Electrochemical Society, vol.124, issue.6, pp.814-819, 1977.
DOI : 10.1149/1.2133418

V. S. Grigin, . N. Shaldaev, and . Malofeeva, Limiting Current of Tungsten Electrochemical Dissolution under Conditions of Natural Convection: Vertical Plane Electrode, J. Electrochem. Soc, vol.149, issue.1, p.6, 2002.

Z. Fan, L. Hourng, and C. Wang, Fabrication of tungsten microelectrodes using pulsed electrochemical machining, Precision Engineering, vol.34, issue.3, pp.489-496, 2010.
DOI : 10.1016/j.precisioneng.2010.01.001

B. Ju, Y. Chen, M. Fu, Y. Chen, and Y. Yang, Systematic study of electropolishing technique for improving the quality and production reproducibility of tungsten STM probe, Sensors and Actuators A: Physical, vol.155, issue.1, pp.136-144, 2009.
DOI : 10.1016/j.sna.2009.08.013

M. Kulakov, I. Luzinov, and K. G. Kornev, Capillary and Surface Effects in the Formation of Nanosharp Tungsten Tips by Electropolishing, Langmuir, vol.25, issue.8, pp.4462-4470, 2009.
DOI : 10.1021/la802489b

N. J. Balmforth, N. Dubash, and A. C. Slim, Extensional dynamics of viscoplastic filaments: I. Long-wave approximation and the Rayleigh instability, Journal of Non-Newtonian Fluid Mechanics, vol.165, issue.19-20, pp.19-20, 2010.
DOI : 10.1016/j.jnnfm.2010.05.012

G. Beranger and H. Mazille, Approche scientifique des surfaces. Caractérisation et propriétés, pp.2-19, 2005.

V. Srivastava and P. M. Pandey, Effect of process parameters on the performance of EDM process with ultrasonic assisted cryogenically cooled electrode, Journal of Manufacturing Processes, vol.14, issue.3, pp.393-402, 2012.
DOI : 10.1016/j.jmapro.2012.05.001

B. H. Yan, F. Y. Huang, H. M. Chow, and J. Y. Tsai, Micro-hole machining of carbide by electric discharge machining, Journal of Materials Processing Technology, vol.87, issue.1-3, pp.1-3
DOI : 10.1016/S0924-0136(98)00345-8

K. Egashira, Y. Morita, and Y. Hattori, Electrical discharge machining of submicron holes using ultrasmall-diameter electrodes, Precision Engineering, vol.34, issue.1, pp.139-144, 2010.
DOI : 10.1016/j.precisioneng.2009.05.007

K. Egashira, A. Matsugasako, H. Tsuchiya, and M. Miyazaki, Electrical discharge machining with ultralow discharge energy, Precision Engineering, vol.30, issue.4, pp.414-420, 2006.
DOI : 10.1016/j.precisioneng.2006.01.004

M. Kunieda and T. Kobayashi, Clarifying mechanism of determining tool electrode wear ratio in EDM using spectroscopic measurement of vapor density, Journal of Materials Processing Technology, vol.149, issue.1-3, pp.1-3, 2004.
DOI : 10.1016/j.jmatprotec.2004.02.022

E. Aligiri, S. H. Yeo, and P. C. Tan, A new tool wear compensation method based on real-time estimation of material removal volume in micro-EDM, Journal of Materials Processing Technology, vol.210, issue.15, pp.2292-2303, 2010.
DOI : 10.1016/j.jmatprotec.2010.08.024

G. Bissacco, J. Valentincic, H. N. Hansen, and B. D. Wiwe, Towards the effective tool wear control in micro-EDM milling, The International Journal of Advanced Manufacturing Technology, vol.54, issue.2, pp.1-4, 2009.
DOI : 10.1016/S0007-8506(07)60020-1

URL : http://orbit.dtu.dk/en/publications/towards-the-effective-tool-wear-control-in-microedm-milling(c378c637-a693-4255-be02-784a170e2fda).html

C. Cogun and S. Akaslan, The effect of machining parameters on tool electrode edge wear and machining performance in Electric Discharge Machining (EDM), KSME International Journal, vol.1, issue.2, pp.46-59, 2002.
DOI : 10.1016/0924-0136(94)01662-K

J. Li, L. Xiao, H. Wang, H. Yu, and Z. Yu, Tool wear compensation in 3D micro EDM based on the scanned area, Precision Engineering, vol.37, issue.3, pp.753-757, 2013.
DOI : 10.1016/j.precisioneng.2013.02.008

Y. Yahagi, T. Koyano, M. Kunieda, and X. Yang, Micro Drilling EDM with High Rotation Speed of Tool Electrode Using the Electrostatic Induction Feeding Method, Procedia CIRP, vol.1, pp.162-165, 2012.
DOI : 10.1016/j.procir.2012.04.028

URL : https://doi.org/10.1016/j.procir.2012.04.028

Q. Yin, B. Wang, Y. Zhang, F. Ji, and G. Liu, Research of lower tool electrode wear in simultaneous EDM and ECM, Journal of Materials Processing Technology, vol.214, issue.8, pp.1759-1768, 2014.
DOI : 10.1016/j.jmatprotec.2014.03.025

Z. Y. Yu, T. Masuzawa, and M. Fujino, Micro-EDM for Three-Dimensional Cavities - Development of Uniform Wear Method -, CIRP Annals, vol.47, issue.1, pp.169-172, 1998.
DOI : 10.1016/S0007-8506(07)62810-8

D. Staack, B. Farouk, A. Gutsol, and A. Fridman, Characterization of a dc atmospheric pressure normal glow discharge, Plasma Sources Science and Technology, vol.14, issue.4, pp.700-711, 2005.
DOI : 10.1088/0963-0252/14/4/009

J. Wang, E. Ferraris, M. Galbiati, J. Qian, and D. Reynaerts, Combined Pulse Characterization and Discrimination for Micro-EDM Milling Tool Wear Study, Proceedings of the 10th International Conference on Multi-Material Micro Manufacture, pp.978-981, 2013.
DOI : 10.3850/978-981-07-7247-5-411

K. Egashira, A. Matsugasako, H. Tsuchiya, and M. Miyazaki, Electrical discharge machining with ultralow discharge energy, Precision Engineering, vol.30, issue.4, pp.414-420, 2006.
DOI : 10.1016/j.precisioneng.2006.01.004

K. Egashira and K. Mizutani, EDM at Low Open-Circuit Voltage, Journal of The Japan Society of Electrical Machining Engineers, vol.37, issue.85, pp.21-26, 2004.
DOI : 10.2526/jseme.37.85_18

Y. M. Lim and S. H. Kim, Diameter control of an extremely thin cylindrical microprobe by electrochemical etching, Review of Scientific Instruments, vol.34, issue.5, p.2166, 2000.
DOI : 10.1016/S0007-8506(07)61805-8

Q. Yann, S. Laurent, G. Grigore, L. Université, B. Pascal et al., , pp.1-12, 2001.

B. Raphet, Etats de surface -Caractérisation, pp.2-21, 2008.

B. Raphet, Etat de surface -Mesure, pp.2-13, 2006.

D. Kremer, Usinage par électroérosion, pp.2-22, 2000.

D. P. Adams, M. J. Vasile, G. Benavides, and A. N. Campbell, Micromilling of metal alloys with focused ion beam???fabricated tools, Precision Engineering, vol.25, issue.2, pp.107-113, 2001.
DOI : 10.1016/S0141-6359(00)00064-7