Amorphous optical coatings of present gravitational-wave interferometers
Abstract
We report on the results of an extensive campaign of optical and mechanical characterization of the ion-beam sputtered oxide layers (Ta2O5, TiO2, Ta2O5–TiO2, SiO2) within the high-reflection coatings of the Advanced LIGO, Advanced Virgo and KAGRA gravitational-wave detectors: refractive index, thickness, optical absorption, composition, density, internal friction and elastic constants have been measured; the impact of deposition rate and post-deposition annealing on coating internal friction has been assessed. For Ta2O5 and SiO2 layers, coating internal friction increases with the deposition rate, whereas the annealing treatment either erases or largely reduces the gap between samples with different deposition history. For Ta2O5–TiO2 layers, the reduction of internal friction due to TiO2 doping becomes effective only if coupled with annealing. All measured samples showed a weak dependence of internal friction on frequency [ϕ c(f) = af b , with −0.208 < b < 0.140 depending on the coating material considered]. SiO2 films showed a mode-dependent loss branching, likely due to spurious losses at the coated edge of the samples. The reference loss values of the Advanced LIGO and Advanced Virgo input (ITM) and end (ETM) mirror HR coatings have been updated by using our estimated value of Young’s modulus of Ta2O5–TiO2 layers (120 GPa) and are about 10% higher than previous estimations.
Origin : Publisher files allowed on an open archive